Wall Formwork Contractors

Originally, wall formworks consisted of square timbers and boards. But, nowadays, we have concrete wall formwork that’s built for sturdiness. Wall formwork can be categorised and utilised for a wide range of applications. Wall formwork is a crucial part of any project due to their long service life and strength.

It is also important to note that there’s a difference between girder wall formwork and panel formwork.

• For the wall formwork design, you’ve got girders that support the form lining. The steel profiles then serve as walers. Thus, this makes it highly adaptable, and it can accommodate complex shapes and high loads. For instance, it is used for architectural concrete structures with high requirements for surfaces and anchor patterns.
• On the other hand, you’ve got panel formwork. This formwork involves frames made of aluminium or steel. There are fixed panel sizes for wall connections and other connections that contribute to fast forming. It also makes it easier to form working operations because of a chance to move larger units by crane.

A wall formwork system comes in different types. For you to choose the right formwork, you need to understand their differences. To help you out, here several of its types:

1. Traditional Timber Formwork For this wall formwork, it is created on-site out of timber and plywood. It’s one of the easiest ways to build wall formwork. But, it can be time-consuming if you are planning to build huge structures. Another thing to consider is that the plywood facing often has a relatively short lifespan.

2. Engineered Formwork System The engineered formwork system is designed based on prefabricated modules with a steel or aluminium frame. It is then covered on the application or concrete side with material that has the wanted surface structure. One of the benefits of using this wall formwork system is the speed of construction. Aside from that, it also has lower life-cycle costs.

3. Reusable Plastic Formwork If you want to build widely variable but simple concrete structures, you should consider this system. Its wall formwork design consists of panels that are lightweight and robust. These are often the formwork that is used for low cost, mass housing projects. Also, these types of modular enclosures consist of load-bearing roofs. To maximise space, they are stacked on top of one another.

4. Permanent Insulated Formwork This is another wall formwork that is assembled on-site and often made of insulating concrete forms. This also remains in place after the concrete has been cured. Using this formwork involves many benefits in terms of strength, superior thermal and acoustic insulation, speed, and integrated furring strip for cladding finishes.

5. Stay-In-Place Structural Formwork Systems This kind of wall formwork is usually built out of prefabricated-fibre reinforced plastic forms. You can see them in the shape of hollow tubes. They remain in place after the concrete has been cured. Also, they are often used for columns and piers.

6. Flexible Formwork Compared to all the rigid moulds mentioned above, flexible formwork uses lightweight materials and high strength sheets of fabric. Through this, it can take advantage of the fluidity of concrete and thus, create highly optimised and architecturally interesting building forms.

Formwork is the use of moulds and support structures to build structures out of concrete. It can be made using moulds, out of wood, steel, aluminium, and other prefabricated forms. It can also be either a temporary or permanent mould into which concrete and other materials are poured. The concrete will then harden. The construction of formwork takes time and can have an expenditure of at least 20 to 25% of the structure cost.

Some people often confuse formwork and shuttering - this is because both of them are temporary structures utilised on-site or for specific purposes. However, the two are quite different.

• Formwork is used as a mould to pour materials such as concrete. The formwork may be in a vertical or horizontal arrangement to keep the concrete in its place. It will remain this way until it has the desired strength and shape.
• Shuttering, for the most part, is simply a part of the formwork. This is the vertical temporary structure used so that the concrete can achieve the desired shape. Examples of shuttering are vertical formwork like formwork for columns or retaining walls, among others.

iseekplant has a nationwide network of trusted wall formwork companies on our marketplace. With our help, you can find wall formwork companies operating in all capital cities from Brisbane to Sydney, Canberra, Melbourne to Darwin, Perth and Adelaide. Aside from those locations, our suppliers also provide wall formwork solutions in all major towns and cities across Australia from Cairns down to the Sunshine Coast, Gold Coast, Newcastle, Geelong and Hobart.

Finding wall formwork has never been simpler than with iseekplant. We’ll help you match with your chosen wall formwork company no matter where you’re located across the country. If you don’t have time to search on our marketplace, simply use our Get a Quote tool and tell us what you need. We’ll get your nearest wall formwork suppliers to contact you with their best quotes so you can compare prices easily. Then, just pick the company you’re most confident with. If you’d like to contact us directly, you can call 1300 691 912 or email at projects@iseekplant.com.au.