Find the Best Beaver Tail Trucks Near You

Beaver tail trucks distinguish themselves by their unique rear section, which slopes down to create a ramp. This design facilitates the loading and unloading of heavy machinery like excavators and forklifts. Unlike flatbeds or other truck types, beaver tails eliminate the need for additional loading equipment, making them ideal for quick and efficient transport of construction equipment.

Beaver tail trucks are well-suited for transporting oversized machinery or equipment, particularly those used in construction and landscaping. Their ramp design allows for effortless loading of large items. However, it's essential to adhere to legal weight and size limits, and sometimes, a special permit may be required for exceptionally large loads.

Beaver tail trucks are particularly beneficial in the construction, landscaping and agricultural sectors. They are ideal for transporting heavy machinery like excavators, backhoes and tractors. Their versatility also makes them useful for events and film production, where they can transport stages, props and other large equipment.

The legal weight and load size limits for beaver tail trucks vary by region and road regulations. Typically, these trucks can carry loads up to a particular tonnage, often around 15 to 30 tons, depending on the truck's size and design. It's crucial to check local regulations and obtain appropriate permits if required.

The ramp mechanism on a beaver tail truck is typically hydraulic, allowing the truck's back end to lower to the ground, forming a ramp. This design enables machinery to be driven directly onto and off the truck bed, simplifying the loading and unloading process and reducing the need for additional lifting equipment.

When operating a beaver tail truck's hydraulic ramps, safety protocols include ensuring the area is clear of obstacles and personnel, checking the hydraulic system for leaks or faults and securing the load correctly once on the truck. Operators should be trained in using these specific ramps and follow all manufacturer guidelines.

Yes, you can hire beaver tail trucks for interstate transport. However, it's important to consider factors like varying state regulations and route planning to accommodate the truck's size and potential need for overnight stops. Planning and permits may be required, especially for longer or cross-country trips.

The cost of hiring a beavertail truck in Australia varies a lot depending on size, whether it comes with a driver, how long you hire it, and how far it needs to travel. Here are some typical rates and what to watch out for:

Typical Beaver Tail Truck Hire Costs in Australia

Additional Costs to Consider

• There may be a minimum hire time (e.g. 8 hours) for some truck + driver arrangements.
• Travel / pickup fees: Some companies add a travel charge if they need to bring the truck to your site.
• Tolls and fuel: These are often not included and are charged extra.
• Insurance or damage waiver: Make sure to ask whether this is optional or included.

Bottom line: For a standard beavertail truck with a driver, expect around A$130–140/hr, but for longer-term or specialised use (like machinery transport), daily rates (e.g. ~A$300+) are common. Always get a detailed quote including all extras.

Beavertail trucks are versatile transport vehicles designed for loading and moving machinery or heavy equipment with ease. They are commonly used in construction, landscaping, and civil works.

Typical Equipment Transported by Beavertail Trucks

The tilting “beavertail” tray allows equipment to be driven on and off safely without needing ramps, making it ideal for sites where heavy machinery needs frequent relocation. For very large or unusually shaped equipment, an oversized float or specialised transport vehicle may be needed.

The load capacity (payload) of beavertail trucks can vary a lot depending on the truck’s size, gross vehicle mass (GVM), and body configuration:

• According to Sterling Plant Bodies, typical payloads are:
  • 32-tonne truck → ~ 18.5 tonnes payload
  • 26-tonne truck → ~ 14 tonnes payload
  • 18-tonne truck → ~ 9.5 tonnes payload
• Smaller or specialised trucks have lower payloads: for example, a Fuso Fighter FK 1024 beavertail has a payload of ~4,320 kg.
• In some beavertail designs (e.g. very heavy-duty), their bodies themselves (tray + ramps) can support very large loads — for example, a 12.3 t payload for a beavertail / tipper tray body.

Bottom line: Beavertail trucks’ load capacity can range from a few tonnes for smaller rigs to 18+ tonnes for large rigid trucks. When hiring or buying, always check the specific truck’s GVM, tare weight, and rated payload.

Yes — beavertail trucks are designed with built-in tilting trays and ramps to make loading and unloading equipment easy and safe. The tray tilts to the ground, forming a ramp so machinery such as mini excavators, bobcats, or skid steers can drive on and off without additional equipment.

This design makes beavertail trucks ideal for construction, landscaping, and civil works, where machinery often needs to be moved between sites efficiently.

Yes — beavertail trucks can often access residential sites, but it depends on the truck size, driveway width, overhead clearance, and site conditions. Smaller beavertail trucks are ideal for tight suburban areas, while larger rigid trucks may struggle with narrow driveways, low fences, or overhanging trees.

A professional hire company or licensed operator will often survey the site beforehand to ensure safe access and may advise on the best truck size or alternative delivery methods.